#1 CHOICE OF PROFESSIONALS. Tapcon is the #1 recognized screw anchor brand in the industry. The blue, corrosion-resistant coating enables them to withstand the harshest conditions. And their unmatched performance in concrete, block and brick applications make them an excellent alternative to expansion anchors, plugs and lag shields. For the 3/16” and 1/4” diameter tapcon the hole must be drilled a minimum of 1/4” deeper than the tapcon screw hererate and for the 3/8”, 1/2”, 5/8” and 3/4” the hole must be a minimum of 1” deeper than the tapcon hererate. Tapcon Concrete AnchorsOur concrete screw anchors deliver 30% less torque and 20% more holding power, while our drill bits make it possible to create precise holes at maximum power.

Tapcon Concrete Screw technical specifications and information. Holding values, size range, Material Specifications and values. Tapcon is packaged 100 pieces per box and 500 pieces per master carton except HW4-600 and PF4-600 (400 in master carton). ANCHOR MIN. DEPTH OF f’c = 2000 PSI (13.8 MPa) f’c = 3000 PSI (20.7 MPa) f’c = 4000 PSI (27.6 MPa) f’c = 5000 PSI (34.5 MPa) DIA. EMBEDMENT TENSION SHEAR TENSION SHEAR TENSION SHEAR TENSION SHEAR In. Tapcon Concrete Anchor Selection Guide. Insulation to masonry. 1/4 x 6 3/16 x 7-1/2 4-1/4 - 5. Notes: The minimum embedment depth required is 1 and the maximum embedment is 1-3/4. These requirements are for all lengths of Tapcon . All sizes are available in hex washer head (HWH) and Philips flat head (PFH). One drill is provided with every box of 100 pieces.

Tapcon Screw Anchor - Technical Data Ultimate Tension and Shear Values (Lbs/kN) in Concrete . NOTE: 3/16” Tapcon requires 5/32” bit, 1/4” Tapcon requires … The design of the Tapcon concrete screw allows them to anchor into concrete, brick, and block. Tapcon concrete screws tap threads into a predrilled hole in concrete, brick or block. The 5/32 bit is used for the 3/16 Tapcon concrete screw and the 3/16 bit is used for the 1/4 Tapcon.